Dam Formwork DB180/240

 TECON Dam formwork DB180 & DB240 is used for forming one-side conrete structure. It has high reliability and bearing capacity for mass concrete structures without tie rods to pull through. It is widely used for in dams, river power stations or navigation locks.

 

Features of Dam Formwork DB180/240

Can produce both single side inclined wall and double side inclined wall

High load capacity without tie rod to pull through concrete structure

Shorten crane time due to one unit design of dam formwork

Reliable anchorage system and muscular bracket strength ensure the highest on-site safety

Can be compatible with all TECON wall formwork system

 

Specification of Dam Formwork DB180/240

No tie rods are needed to pull through the wall

Two dam formwork climbing brackets and the TECON wall formwork section can be assembled into one complete unit for a crane lift

Width of the formwork: 2.2/2.4

Maximum pouring height: 4 m

Available incline degree: ±45°

Distance of retrusion: 45 cm

Anchor point bearing capacity: 22 kN

Power unit: tower crane

Required crane lifting power: 30 kN/unit

 

Application of Dam Formwork DB180/240

One-sided construction projects such as dams, run-off river power stations and navigation locks.

 

Other Formwork Products You May Also Like

 

Climbing Formwork CB180/240

TECON Climbing formwork CB180/240 is consisted by formwork panel, climbing bracket, shaft ...

 

Self-climbing Formwork TSC50 & TSC100

TECON Self-climbing formwork TSC50 & TSC100 is a crane independent climbing system. It off...

 

Multi-function Climbing Formwork MB180

TECON Multi-function Climbing Formwork MB180, is an advanced version of jump formwork with...

 

TECON company offers concrete formwork (shuttering) and scaffolding for projects worldwide, with many years of experience in dealing with contractors, builders, and architects. We are one of the leading formwork manufacturers and suppliers of concrete slab shuttering, formwork, and scaffolding engineering from China.

 

 



评论

发表评论

此博客中的热门博文

Usage and Maintenance of Building Formwork

图片
Usage and Maintenance of Building Formwork Appropriate maintenance and correct use of building formworks can not only extend the life span but also reduce a lot of unnecessary troubles for the construction project. So how can we extend the service life of building formworks? Ⅰ. The formwork must be covered during transportation. When transporting the building aluminium column formwork , it should be noted that a transport tool with a better shielding effect should be selected. Or it can be covered with plastic cloth or thin felt to avoid the sun and rain during transportation and prevent the building formwork from being severely deformed in a short time due to the natural environment. Ⅱ. Place the building formwork neatly after unloaded to prevent sun and rain. After unloading the truck, the formwork should be neatly stacked on the flat ground. It should be noted that the board surface should not be in direct contact with the ground, and wood should be used to separate it layer by l...
阅读全文

Shoring Tower TST60

图片
  TECON Shoring Tower  TST60 is the most cost-effective as well as high efficient supporting system in formwork construction. TST60 is consisted of main frame, diagonal brace, U head jack and base jack ect.. It is specially developed for high shoring and heavy load projects, and it is widely used in bridges, subways, buildings, and other civil engineering projects.   Features of Shoring Tower TST60 Fast and user friendly in assembly with very few elements High load-bearing capacity with less materials Can meet different shoring requirements by only two frame heights and adjustable jacks Hot-dip galvanized surface treatment for the mainframe offers more than ten years service life Offers bigger bearing capacity and higher shoring for vairous kind of shuttering including TECON Slab Flex 20 and Slab Table formwork   Specifications of Shoring Tower TST60 Main frame is made from S355 with O.D.60*3 mm tubes The work load capacity of each leg is 60 kN at 5 m height with 2.5...
阅读全文

High Rise Formwork

图片
  Safety is the first necessity of high-rise projects and TECON takes safety as its first priority. We not only focus on ensuring project quality, but also pay great attention to the personal safety of laborers.  Hence with a think-tank in TECON technical team and cutting-edge technology in producing different types of formwork, we are able to give birth to TECON sophisticated self-climbing and climbing formworks, as well as facade protection, all with fully closed multi-platforms.   The Advantages of Teconform High Rise Formwork All TECON formwork for high rise building  offers construction sites steady & high-safety progress during self-climbing via hydraulic cylinders or other power units. All TECON climbing brackets can be rescheduled together with right size shuttering in order to fit any size and shape highrise buildings without worry about its reuse and cost.   Reliable embedded anchor system and multi-platform with facade protection maximize the safe...
阅读全文