Column Formwork

 TECON round column shuttering system mainly includes Adjustable Steel Frame Column Formwork, Portable Column Formwork, BASE 20 Column Formwork, Plastic Round Column Formwork, and Plastic Adjustable Column Formwork.

 

They can fabricate different kinds of columns at different heights and diameters.

 

Why Choose Column Formwork

The design of the round column formwork should be able to withstand the high pressure of fresh concrete because the relatively small cross-section requires rapid pouring of concrete. Therefore, it is essential to seal the joint very carefully and tightly.

 

The cross-section and height can be adjusted quickly and easily with minimum effort and the minimum number of system components, which is an essential criterion for determining the cost-effectiveness of the column plastic formwork systems. In addition, it is usually necessary to build many chromatographic columns with the same cross-section, so these systems need to be quickly transported to the next place of use without any assembly work. In addition, TECON has developed a system that utilizes the column formwork system to meet the high requirements that often occur on concrete surfaces, the uniformity of corners or sharp edges.

 

Types of Column Formwork

 

TECON Adjustable HETO Frame Column Formwork

TECON Adjustable HETO Frame Column formwork is a steel frame panel system.

 

TECON Adjustable Plastic Column Formwork

TECON Adjustable Plastic Column Formwork, is the most light and labor saving col...

 

TECON Plastic Round Column Formwork

TECON Plastic Round Column Formwork, most light and durable round column formwor...

 



评论

发表评论

此博客中的热门博文

Usage and Maintenance of Building Formwork

图片
Usage and Maintenance of Building Formwork Appropriate maintenance and correct use of building formworks can not only extend the life span but also reduce a lot of unnecessary troubles for the construction project. So how can we extend the service life of building formworks? Ⅰ. The formwork must be covered during transportation. When transporting the building aluminium column formwork , it should be noted that a transport tool with a better shielding effect should be selected. Or it can be covered with plastic cloth or thin felt to avoid the sun and rain during transportation and prevent the building formwork from being severely deformed in a short time due to the natural environment. Ⅱ. Place the building formwork neatly after unloaded to prevent sun and rain. After unloading the truck, the formwork should be neatly stacked on the flat ground. It should be noted that the board surface should not be in direct contact with the ground, and wood should be used to separate it layer by l...
阅读全文

Shoring Tower TST60

图片
  TECON Shoring Tower  TST60 is the most cost-effective as well as high efficient supporting system in formwork construction. TST60 is consisted of main frame, diagonal brace, U head jack and base jack ect.. It is specially developed for high shoring and heavy load projects, and it is widely used in bridges, subways, buildings, and other civil engineering projects.   Features of Shoring Tower TST60 Fast and user friendly in assembly with very few elements High load-bearing capacity with less materials Can meet different shoring requirements by only two frame heights and adjustable jacks Hot-dip galvanized surface treatment for the mainframe offers more than ten years service life Offers bigger bearing capacity and higher shoring for vairous kind of shuttering including TECON Slab Flex 20 and Slab Table formwork   Specifications of Shoring Tower TST60 Main frame is made from S355 with O.D.60*3 mm tubes The work load capacity of each leg is 60 kN at 5 m height with 2.5...
阅读全文

High Rise Formwork

图片
  Safety is the first necessity of high-rise projects and TECON takes safety as its first priority. We not only focus on ensuring project quality, but also pay great attention to the personal safety of laborers.  Hence with a think-tank in TECON technical team and cutting-edge technology in producing different types of formwork, we are able to give birth to TECON sophisticated self-climbing and climbing formworks, as well as facade protection, all with fully closed multi-platforms.   The Advantages of Teconform High Rise Formwork All TECON formwork for high rise building  offers construction sites steady & high-safety progress during self-climbing via hydraulic cylinders or other power units. All TECON climbing brackets can be rescheduled together with right size shuttering in order to fit any size and shape highrise buildings without worry about its reuse and cost.   Reliable embedded anchor system and multi-platform with facade protection maximize the safe...
阅读全文