Column Formwork

 Column Formwork

TECON column shuttering system mainly includes Adjustable Steel Frame Column Formwork, Portable round column formwork, BASE 20 Column Formwork, Plastic Round Column Formwork, and Plastic Adjustable Column Formwork.

 

They can fabricate different kinds of columns at different heights and diameters.

 

Why Choose Column Formwork

The design of the round column shuttering should be able to withstand the high pressure of fresh concrete because the relatively small cross-section requires rapid pouring of concrete. Therefore, it is essential to seal the joint very carefully and tightly.

 

The cross-section and height can be adjusted quickly and easily with minimum effort and the minimum number of system components, which is an essential criterion for determining the cost-effectiveness of the column formwork system. In addition, it is usually necessary to build many chromatographic columns with the same cross-section, so these systems need to be quickly transported to the next place of use without any assembly work. In addition, TECON has developed a system that utilizes the column formwork system to meet the high requirements that often occur on concrete surfaces, the uniformity of corners or sharp edges.

 

Types of Column Formwork

 

TECON Adjustable HETO Frame Column Formwork

TECON Adjustable HETO Frame Column formwork is an adjustable column system that ensures high efficient assembly via crane assistance. It consists of S355 steel frame formwork panel, column coupler and panel strut ect.. Tens of column sizes can be easily formed by HM panels.

 

TECON Adjustable Plastic Column Formwork

TECON Adjustable Plastic Column Formwork is the lightest and most labour-saving adjustable column formwork. Fast and easy erection makes it excelent in realizing 66 column sizes by only 2 types adjustable panels.

 

TECON Plastic Round Column Formwork

TECON Round Column Formwork consists of plastic round column and steel round column in different diameters. Plastic round column fomrwork is the lightest and economic column formwork with diameter ranges from 300mm to 450mm with 50mm as increment. Steel round column formwork can be customzied in bigger diameters at any size.

 

For more info about shuttering formwork, contact us.

 


评论

发表评论

此博客中的热门博文

The Concept of Building Formwork

图片
The building formwork used for the construction of cast-in-place concrete structure is mainly composed of three parts: panel, supporting structure, and connecting parts. The panel is a bearing plate that directly contacts the newly poured concrete. The supporting structure is a temporary structure supporting the faceplate, concrete, and construction load, ensuring that the template structure of the building is firmly combined without deformation or destruction. The connecting parts are components that connect the panel and the supporting structure as a whole. The building formwork is a molded shell and bracket formed by pouring concrete. According to the nature of the material, it can be divided into building formwork, building wood glue board, film board, multi-layer board, double-sided adhesive and double-sided film building formwork, etc. According to the construction process conditions, it can be divided into cast-in-place concrete formwork, pre-assembled formwork, large formwor
阅读全文

TECON-Form Shuttering

图片
  In our wide product range of TECON-Form table shuttering , we have different grade film faced plywood, from TECON-Form Poplar, TECON-Form Hardwood to TECON-Form Birch. We also offer high-quality new material shuttering boards for sale such as TECON-Form Plastic Board.   The economic poplar core plywood has reuse times varying from 4 to 8 times, while high-end imported TECON-Form Birch can be used up to 30 times or even more.     TECON Plastic Board, as the replacement of the marine board, can be used anywhere and creates very smooth concrete finishing with a minimum of 30 times reuse. Even in tropical areas, no delamination will occur. Therefore it maximizes reuse times and saves cost significantly.   Types of TECON-Form Shuttering   TECON-Form Film Faced Plywood TECON-Form Film Faced Plywood series ranges from Poplar, Hardwood, Birch and Bir...   TECON-Form Plastic Board TECON-Form Plastic Board series are consists of Cellular Board, Plas-film Board ...   As one of film faced plywoo
阅读全文

Various Formwork Accessories are Also Available for Separate Purchase

图片
  C oncrete F ormwork A ccessories TECON's   formwork components  include aluminium TMP prop, heavy-duty steel prop (EN1065), TECON-Form plywood (film faced plywood with different grade and even imported quality), wall tie system, H20 timber beam, aluminium beam, steel waler, table head, tripod, BFD coupler, flange clamp, scaffolding couplers etc.   TECON also offers OEM fabrication service for any accessory withdrawing or samples from formwork and scaffolding systems  companies outside China.   TECON-Form Shuttering In our wide product range of TECON-Form Shuttering, we have different grade film faced plywood, from...   Girder We have two types formwork girder for DIY or tailed formwork planning use.   Shoring Props TECON Shoring props are covering full range of props as floor support, fabricated on different load ...
阅读全文