Climbing Formwork

 Climbing Formwork

TECON self climbing formwork system mainly includes Self-climbing Formwork TSC80, Jump Climbing Formwork CB180/240, Dam Formwork DB180/240 and Multi-function Climbing Formwork MB180.

 

Self-climbing formwork TSC80 can climb by itself via hydraulic cylinder, while Formwork CB180/240 can only climb via tower crane lift. Dam Formwork DB180/240 can fabricate both single side wall and double side wall without any tie rod pull through. Multi-function Climbing Formwork MB180 is always guided by its rail during climbing, and it can climb freely with or without tower crane lift sine it has its own mobile hydraulic cylinder.

 

They are widely used in high-rise buildings, bridge pylons, concrete tanks and other civil engineering project.

 

Types of Climbing Formwork

 

Self-climbing Formwork TSC50 & TSC100

TECON Self-climbing formwork TSC50 & TSC100 is a crane independent climbing system lifted by hydraulic cylinders. It offers efficient and cost saving concreting solution for high-rise building, bridge pylons etc.. Up to 100kN lifting capacity and reliable embedded anchorage system ensures stable and safe automatic climbing with integrated formwork together.

 

Climbing Formwork CB180/240

TECON Climbing Formwork CB180 & CB240 is a crane lifted climbing system. The climbing unit consists of formwork panel, climbing bracket, shaft platform beam and anchoring system. It can jump to the next pouring height for the core wall or external wall with the assistance of tower crane, and provides safe workplatform for both formwork panel and site workers.

 

Dam Formwork DB180/240

TECON Dam formwork DB180 & DB240 is used for forming one-side conrete structure. It has high reliability and bearing capacity for mass concrete structures without tie rods to pull through. It is widely used for in dams, river power stations or navigation locks.

 

For more info about formwork civil engineering and climbing formwork system, contact us.

 

 


评论

发表评论

此博客中的热门博文

The Concept of Building Formwork

图片
The building formwork used for the construction of cast-in-place concrete structure is mainly composed of three parts: panel, supporting structure, and connecting parts. The panel is a bearing plate that directly contacts the newly poured concrete. The supporting structure is a temporary structure supporting the faceplate, concrete, and construction load, ensuring that the template structure of the building is firmly combined without deformation or destruction. The connecting parts are components that connect the panel and the supporting structure as a whole. The building formwork is a molded shell and bracket formed by pouring concrete. According to the nature of the material, it can be divided into building formwork, building wood glue board, film board, multi-layer board, double-sided adhesive and double-sided film building formwork, etc. According to the construction process conditions, it can be divided into cast-in-place concrete formwork, pre-assembled formwork, large formwor
阅读全文

TECON-Form Shuttering

图片
  In our wide product range of TECON-Form table shuttering , we have different grade film faced plywood, from TECON-Form Poplar, TECON-Form Hardwood to TECON-Form Birch. We also offer high-quality new material shuttering boards for sale such as TECON-Form Plastic Board.   The economic poplar core plywood has reuse times varying from 4 to 8 times, while high-end imported TECON-Form Birch can be used up to 30 times or even more.     TECON Plastic Board, as the replacement of the marine board, can be used anywhere and creates very smooth concrete finishing with a minimum of 30 times reuse. Even in tropical areas, no delamination will occur. Therefore it maximizes reuse times and saves cost significantly.   Types of TECON-Form Shuttering   TECON-Form Film Faced Plywood TECON-Form Film Faced Plywood series ranges from Poplar, Hardwood, Birch and Bir...   TECON-Form Plastic Board TECON-Form Plastic Board series are consists of Cellular Board, Plas-film Board ...   As one of film faced plywoo
阅读全文

Various Formwork Accessories are Also Available for Separate Purchase

图片
  C oncrete F ormwork A ccessories TECON's   formwork components  include aluminium TMP prop, heavy-duty steel prop (EN1065), TECON-Form plywood (film faced plywood with different grade and even imported quality), wall tie system, H20 timber beam, aluminium beam, steel waler, table head, tripod, BFD coupler, flange clamp, scaffolding couplers etc.   TECON also offers OEM fabrication service for any accessory withdrawing or samples from formwork and scaffolding systems  companies outside China.   TECON-Form Shuttering In our wide product range of TECON-Form Shuttering, we have different grade film faced plywood, from...   Girder We have two types formwork girder for DIY or tailed formwork planning use.   Shoring Props TECON Shoring props are covering full range of props as floor support, fabricated on different load ...
阅读全文