Assembly And Disassembly of Bridge Formwork







Assembly And Disassembly of Bridge Formwork

Ⅰ. Assembly of bridge formwork

When assembling the bridge formwork, especially when shaping the bridge steel formwork, we need to pay attention to the following issues:



(1) All components of the table formwork construction system are complete and firmly connected. The assembled formwork should be placed neatly according to its structural characteristics to ensure stability.



(2) Professional technicians must be arranged for technical guidance on the assembly site.



(3) Before assembling the formwork, check the components of the formwork system and inspect the appearance. Components with serious defects, bumps, deformation, etc. shall not be used.



(4) Steel bridge formwork is used for concrete pouring and molding. Metal formwork is widely used in construction projects due to its multiple-use and beautiful appearance of concrete pouring. During the installation and use of bridge steel formwork, we must assemble in accordance with regulations to ensure effective work.



Ⅱ. Disassembly of bridge formwork

When disassembling the bridge formwork, we should pay attention to the following items:



(1) The internal mold with reserved holes (that is, the drawing pipe) should be removed when the concrete strength can ensure that the surface does not collapse or crack. The pull-out time should be determined through experiments, and the compressive strength of concrete should reach 0.8MP.



(2) When the box girder is removed from the outer mold and the inner end, it must wait for the strength of the beam body to reach 60% of the design strength, that is, 30Mpa, before the mold removal operation can be carried out. In addition, the temperature difference between the surface concrete and the environment is not more than 15°C.



(3) Regarding the time for demolding of concrete, in addition to the strength of concrete when demolding, the temperature of concrete should also be considered. The temperature (caused by the heat of hydration of the cement) should not be too high, so as to prevent the concrete from falling too fast and cracking when it contacts the air, and it is not allowed to pour cold water for curing at this time. Before the temperature inside the concrete starts to cool down and when the temperature inside the concrete is high, the mold shall not be removed.



(4) The dismantling of the form shall be carried out in the reverse direction of the erecting form, and shall not damage the concrete so as to reduce the damage of the formwork. After the formwork is separated from the concrete, the formwork can be disassembled and lifted.



(5) The demolition of the bridge formwork should be carried out in the order of design, and it is strictly forbidden to throw away the formwork during demolition.



(6) After the formwork is removed, it should be repaired and sorted, and stored properly.






评论

发表评论

此博客中的热门博文

Heavy Duty Steel Prop

图片
  TECON Heavy Duty   Prop  is the most robust and compatible steel props with high bearing capacity. It comply with EN1065 standards in two series, TEP-D and TEP-E. They have the additional benefit of requiring less because of their high load capacity.   Feature of Heavy Duty S teel P rops F ormwork Robust and long service life High bearing capacity following EN 1065 standard Cast steel nut Safe zone prevent hand from harzad Electro galvanization, powder coated and hot-dip galvanization finishing for option   Specification of Heavy Duty Steel Prop Shoring heights: 2.5/3.0/3.5/4.0/4.5/5.0/5.5 m 1.7 times safety factor within work load The work load of TEP-D is 20 kN The work load of TEP-E is 30 kN Outer Dimension: 76.1/ 63.5 mm High tensile steel tube Q355   Application of Heavy Duty Steel Prop Applied as shoring support in various slab formwork shuttering  system with high standard
阅读全文

Climbing Formwork

图片
  TECON Climbing formwork system  mainly includes Self   climbing Formwork  TSC80, Jump Climbing Formwork CB180/240, Dam Formwork DB180/240 and Multi-function Climbing Formwork MB180.   Self-climbing formwork TSC80 can climb by itself via hydraulic cylinder, while Formwork CB180/240 can only climb via tower crane lift. Dam Formwork DB180/240 can fabricate both single side wall and double side wall without any tie rod pull through. Multi-function Climbing Formwork MB180 is always guided by its rail during climbing, and it can climb freely with or without tower crane lift sine it has its own mobile hydraulic cylinder.   They are widely used in high-rise buildings, bridge pylons, concrete tanks and other civil engineering project.   TECON is a  professional formwork suppliers, we provide scaffolding for slab formwork , Wall Formwork, Column Formwork, Beam & Slab Formwork, Modular Formwork, Special Formwork and etc. Want to know more? Please contact us.
阅读全文

Advantages of Building Formwork.

图片
Advantages of Building Formwork. Ⅰ. What is a building formwork Building formworks have a wide range of applications in people's daily lives and can be seen everywhere. The building formwork is a temporary supporting structure. It is made according to the design requirements so that the concrete structure and components are formed according to the specified position and geometric size, maintain their correct position, and bear the weight of the building formwork and the external load acting on it. The purpose of building formwork projects is often to ensure the quality and safety of concrete projects, speed up construction progress and reduce project costs. Ⅱ. Eight advantages of building formwork As a widely used building material, building formwork has eight irreplaceable advantages. (1) Smooth and clean. The formwork is tightly spliced and smooth, and the surface and smoothness of the concrete structure after demolding exceed the technical requirements of the existing clear
阅读全文