Dam Formwork DB180/240

 TECON Dam formwork DB180/240 has high dependability and loading capacity for mass concrete structures without tie rods to pull through. It is widely used for forming one-sided construction projects, such as dams, run-off river power stations or navigation locks.

 

Features of Dam Formwork DB180/240

Shorten crane time due to one unit design of dam formwork.

It can produce both single side wall and double side wall inclined.

High load capacity without tie rod to pull through concrete structure.

It can be compatible with BASE 20 formwork, HETO Frame formwork and others.

A reliable anchorage system and muscular bracket strength ensure the highest on-site safety.

 

Specification of Dam Formwork DB180/240

No tie rods are needed to pull through the wall.

Two dam formwork climbing brackets and the TECON wall formwork section can be assembled into one complete unit for a crane lift.

 

Features of Dam Formwork DB180/240

 

Shorten crane time due to one unit design of dam formwork.

 

It can produce both single side wall and double side wall inclined.

 

High load capacity without tie rod to pull through concrete structure.

 

It can be compatible with BASE 20 formwork, HETO Frame formwork and others.

 

A reliable anchorage system and muscular bracket strength ensure the highest on-site safety.

 

 

 

Specification of Dam Formwork DB180/240

 

No tie rods are needed to pull through the wall.

 

Two dam formwork climbing brackets and the TECON wall formwork section can be assembled into one complete unit for a crane lift.

 

 

 

Items

Technical details

Available incline degree

卤45掳

Width of the formwork

2.2m/2.4m

Maximum pouring height

4m

Power unit

Tower crane

Required crane lifting power

30kN/unit

Distance of retrusion

45cm

Anchor point load capacity

22kN

 

 

Application of Dam Formwork DB180/240

One-sided construction projects such as dams, run-off river power stations and navigation locks.

 

Related Formwork of Dam Formwork DB180/240

TECON climbing formwork CB180/240

TECON self-climbing formwork TSC50/100

TECON Multi-function climbing Formwork MB180

 

FAQ

How to get a quotation?

You can send us your material list to request a quotation, or you can also simply send us the structural drawing and project information for complete formwork & scaffolding proposal via the below contacts.

Email: info@teconform.com

Phone: +86-512-65650586

Mobile: +86-13862020161.

 

What is the payment term?

By T/T or L/C.

 

What is the lead time?

For climbing formwork shuttering, self-climbing platform, plastic formwork, we have stock in our warehouse. The preparation of loading will be within 10 to 15 days.

For H20 timber beam, TECON-Form Shuttering, the lead time is from 15 to 25 days.

For other systems, the lead time is from 30 to 45 days.

For a more accurate lead time, don't hesitate to contact us for a specific product based on your quantity.





评论

发表评论

此博客中的热门博文

Heavy Duty Steel Prop

图片
  TECON Heavy Duty   Prop  is the most robust and compatible steel props with high bearing capacity. It comply with EN1065 standards in two series, TEP-D and TEP-E. They have the additional benefit of requiring less because of their high load capacity.   Feature of Heavy Duty S teel P rops F ormwork Robust and long service life High bearing capacity following EN 1065 standard Cast steel nut Safe zone prevent hand from harzad Electro galvanization, powder coated and hot-dip galvanization finishing for option   Specification of Heavy Duty Steel Prop Shoring heights: 2.5/3.0/3.5/4.0/4.5/5.0/5.5 m 1.7 times safety factor within work load The work load of TEP-D is 20 kN The work load of TEP-E is 30 kN Outer Dimension: 76.1/ 63.5 mm High tensile steel tube Q355   Application of Heavy Duty Steel Prop Applied as shoring support in various slab formwork shuttering  system with high standard
阅读全文

Climbing Formwork

图片
  TECON Climbing formwork system  mainly includes Self   climbing Formwork  TSC80, Jump Climbing Formwork CB180/240, Dam Formwork DB180/240 and Multi-function Climbing Formwork MB180.   Self-climbing formwork TSC80 can climb by itself via hydraulic cylinder, while Formwork CB180/240 can only climb via tower crane lift. Dam Formwork DB180/240 can fabricate both single side wall and double side wall without any tie rod pull through. Multi-function Climbing Formwork MB180 is always guided by its rail during climbing, and it can climb freely with or without tower crane lift sine it has its own mobile hydraulic cylinder.   They are widely used in high-rise buildings, bridge pylons, concrete tanks and other civil engineering project.   TECON is a  professional formwork suppliers, we provide scaffolding for slab formwork , Wall Formwork, Column Formwork, Beam & Slab Formwork, Modular Formwork, Special Formwork and etc. Want to know more? Please conta...
阅读全文

Advantages of Building Formwork.

图片
Advantages of Building Formwork. Ⅰ. What is a building formwork Building formworks have a wide range of applications in people's daily lives and can be seen everywhere. The building formwork is a temporary supporting structure. It is made according to the design requirements so that the concrete structure and components are formed according to the specified position and geometric size, maintain their correct position, and bear the weight of the building formwork and the external load acting on it. The purpose of building formwork projects is often to ensure the quality and safety of concrete projects, speed up construction progress and reduce project costs. Ⅱ. Eight advantages of building formwork As a widely used building material, building formwork has eight irreplaceable advantages. (1) Smooth and clean. The formwork is tightly spliced and smooth, and the surface and smoothness of the concrete structure after demolding exceed the technical requirements of the existing clear ...
阅读全文