Dam Formwork DB180/240

 TECON Dam formwork DB180/240 is with high dependability and loading capacity for mass concrete structures without tie rod to pull through. It is widely used for forming one-sided construction projects, such as dams, run-off river power stations or navigation locks.

 

Dam formwork 3D demostration without tie rod pull through the wallDam formwork 3D demostration without tie rod pull through the wall

Dam Formwork DB180/240

Dam Formwork DB180/240

Dam Formwork DB180/240

Dam formwork 3D demostration without tie rod pull through the wall

In-house dam formwork bracket mock up

Dam formwork climbing procedure via crane

GET A QUOTE

Features of Dam Formwork DB180/240

High load capacity without tie rod to pull through concrete structure

Can produce both single side wall and double side wall inclined

Shorten crane time due to one unit design of dam formwork

Reliable anchorage system and strong bracket strength ensures highest on site safety

Can be compatible with BASE 20 formwork, HETO Frame formwork etc.

 

Specification of Dam Formwork DB180/240

Two pieces of dam formwork climbing bracket together with TECON wall formwork section can be assembly into one complete unit for crane lift

 

No tie rods needed to pull through the wall

 

Items

Technical details

Available incline degree

±45°

Width of the formwork

2.2m/2.4m

Maximum pouring height

4m

Power unit

Tower crane

Required crane lifting power

30kN/unit

Distance of retrusion

45cm

Anchor point load capacity

22kN

 

Application of Dam Formwork DB180/240

One-sided construction projects such as dams, run-off river power stations and navigation locks

 

Related Formwork of Dam Formwork DB180/240

TECON-FORM climbing formwork CB180/240, TECON self-climbing formwork TSC50/100, TECON Multi-function climbing Formwork MB180

 


评论

发表评论

此博客中的热门博文

The Concept of Building Formwork

图片
The building formwork used for the construction of cast-in-place concrete structure is mainly composed of three parts: panel, supporting structure, and connecting parts. The panel is a bearing plate that directly contacts the newly poured concrete. The supporting structure is a temporary structure supporting the faceplate, concrete, and construction load, ensuring that the template structure of the building is firmly combined without deformation or destruction. The connecting parts are components that connect the panel and the supporting structure as a whole. The building formwork is a molded shell and bracket formed by pouring concrete. According to the nature of the material, it can be divided into building formwork, building wood glue board, film board, multi-layer board, double-sided adhesive and double-sided film building formwork, etc. According to the construction process conditions, it can be divided into cast-in-place concrete formwork, pre-assembled formwork, large formwor
阅读全文

TECON-Form Shuttering

图片
  In our wide product range of TECON-Form table shuttering , we have different grade film faced plywood, from TECON-Form Poplar, TECON-Form Hardwood to TECON-Form Birch. We also offer high-quality new material shuttering boards for sale such as TECON-Form Plastic Board.   The economic poplar core plywood has reuse times varying from 4 to 8 times, while high-end imported TECON-Form Birch can be used up to 30 times or even more.     TECON Plastic Board, as the replacement of the marine board, can be used anywhere and creates very smooth concrete finishing with a minimum of 30 times reuse. Even in tropical areas, no delamination will occur. Therefore it maximizes reuse times and saves cost significantly.   Types of TECON-Form Shuttering   TECON-Form Film Faced Plywood TECON-Form Film Faced Plywood series ranges from Poplar, Hardwood, Birch and Bir...   TECON-Form Plastic Board TECON-Form Plastic Board series are consists of Cellular Board, Plas-film Board ...   As one of film faced plywoo
阅读全文

Various Formwork Accessories are Also Available for Separate Purchase

图片
  C oncrete F ormwork A ccessories TECON's   formwork components  include aluminium TMP prop, heavy-duty steel prop (EN1065), TECON-Form plywood (film faced plywood with different grade and even imported quality), wall tie system, H20 timber beam, aluminium beam, steel waler, table head, tripod, BFD coupler, flange clamp, scaffolding couplers etc.   TECON also offers OEM fabrication service for any accessory withdrawing or samples from formwork and scaffolding systems  companies outside China.   TECON-Form Shuttering In our wide product range of TECON-Form Shuttering, we have different grade film faced plywood, from...   Girder We have two types formwork girder for DIY or tailed formwork planning use.   Shoring Props TECON Shoring props are covering full range of props as floor support, fabricated on different load ...
阅读全文