teconform

  TECON Dam formwork  DB180/240 is with high dependability and loading capacity for mass concrete structures without tie rod to pull through. It is widely used for forming one-sided construction projects, such as dams, run-off river power stations or navigation locks.   Dam formwork 3D demostration without tie rod pull through the wallDam formwork 3D demostration without tie rod pull through the wall Dam Formwork DB180/240 Dam Formwork DB180/240 Dam Formwork DB180/240 Dam formwork 3D demostration without tie rod pull through the wall In-house dam formwork bracket mock up Dam formwork climbing procedure via crane GET A QUOTE Features of Dam Formwork DB180/240 High load capacity without tie rod to pull through concrete structure Can produce both single side wall and double side wall inclined Shorten crane time due to one unit design of dam formwork Reliable anchorage system and strong bracket strength ensures highest on site safety Can be compatible with BASE 20 formwork, H...

  TECON Column formwork system mainly includes Adjustable Steel Frame Column Formwork, Portable Column Formwork, BASE 20 Column Formwork, Plastic Round Column Formwork , Plastic Adjustable Column Formwork.   They can fabricate different kind of columns at different heights and diameters.   Why Choose Column Formwork The design of the column shuttering  should be able to withstand the high pressure of fresh concrete, because the relatively small cross-section requires rapid pouring of concrete. Therefore, it is especially necessary to seal the joint very carefully and tightly.   The cross-section and height can be adjusted quickly and easily with minimum effort and the minimum number of system components, which is an important criterion for determining the cost-effectiveness of the column formwork system. In addition, it is usually necessary to build a large number of chromatographic columns with the same cross section, so these systems need to be quickly transpo...

  TECON -FORM   Climbing formwork system  mainly includes Self-climbing Formwork TSC80, Jump Climbing Formwork CB180/240, Dam Formwork DB180/240 and Multi-function Climbing Formwork MB180.   Self-climbing formwork system   TSC80 can climb by itself via hydraulic cylinder, while Formwork CB180/240 can only climb via tower crane lift. Dam Formwork DB180/240 can fabricate both single side wall and double side wall without any tie rod pull through. Multi-function Climbing Formwork   MB180 is always guided by its rail during climbing, and it can climb freely with or without tower crane lift sine it has its own mobile hydraulic cylinder.   They are widely used in high-rise buildings, bridge pylons, concrete tanks and other civil engineering project.  

  TECON Slab formwork and beam formwork  system mainly includes Flex 20 Slab Formwork, Slab Table Formwork, Aluflex Slab Formwork, Steel Deck Slab Formwork and Aludeck Slab Formwork.   Slab and beam   formwork   fabrications are feasible with the three systems in modular formworks, among which are Portable Formwork, Plastic Formwork TP60 and Alu-lite Formwork.   Fabrications of diverse   types of slab formwork  are feasible, as well as different storey heights, slab thicknesses and shapes, beam widths and depths etc.   Depending on different layouts and customer’s requirements, TECON -FORM  engineer team will propose the optimal solutions and systems based on cost and site output.  

  TECON aluminum alloy formwork  includes Alumi Frame Wall Formwork, Aluflex Slab Formwork, Alugrid Slab Formwork, Aludeck Slab Formwork and AluLITE Formwork.   All those formwork are fabricated completely by aluminium alloy. For some framed system, they are lined with TECON-Form  Birch or Plas-tech aluminium shuttering construction  as well in order to achieve more reuses time.   Compared with steel formwork, formwork panels made from aluminum alloy ensures much lighter weight, thus all of them can be handled by manual without crane lift. Due to their light weight, it increases site efficiency greatly.   Advantages of Aluminum Formwork The aluminium formwork system  is a building system used to form cast-in-place concrete structures of buildings. This formwork is made of aluminum alloy, which has high tensile strength and is very hard. Aluminum does not rust like steel. Therefore, the aluminium formwork  can be reused hundreds of times. Ligh...

  Safety is the first necessity of high-rise projects and TECON takes safety as its first priority. We not only focus on ensuring project quality, but also pay great attention to the personal safety of laborers.  Hence with a think-tank in TECON formwork   technical team and cutting-edge technology in producing different types of formwork, we are able to give birth to TECON sophisticated self-climbing and climbing formworks, as well as facade protection, all with fully closed multi-platforms.   The Advantages of Teconform High Rise Formwork All TECON formwork for high rise building  offers construction sites steady & high-safety progress during self-climbing via hydraulic cylinders or other power units. All TECON climbing brackets can be rescheduled together with right size shuttering in order to fit any size and shape highrise buildings without worry about its reuse and cost.   Reliable embedded anchor system and multi-platform with facade protection m...

  To span, a bridge is to make knowledge to experience. TECON is firmly committed to building its lead in formwork-technology   of bridge shuttering   and formwork bridge construction . This is the reason it continues developing measures to boost construction efficiency and putting them into practice systematically.   TECON formwork  solutions always come as a package that delivers tangible benefits and added value to our customers. We have a client-orientated mindset and 'build bridges' to our customers' goals.   The Advantages of Teconform Bridge Formwork The automatic bridge formwork  handles significant variations in the design of piers and pylons, regardless of geometry, height, and dimension.   Cost-effective and on-time delivery of material-optimized shoring scaffolds for safe and economical transfer of high loads from the upper structure of the bridge.   TECON's all-in-one system offers excellent cost-effectiveness and fast equipment ...

  The purpose of the high-grade building formwork is to form and maintain the newly poured concrete so that it can reach a certain strength to withstand the temporary structure of its own weight and can be removed as a formwork. With the development of the construction industry, formwork engineering has become an important aspect of the construction industry. Vigorously developing formwork projects can not only improve the efficiency of the construction but also reduce costs.   In the early 1970s, Chinese building structures were dominated by brick-concrete structures, and building templates were dominated by wooden formwork in china ; but because of the large use of wood, China ’s timber resources have become increasingly scarce. Later, China has successfully developed the advanced construction technology of combined steel formwork, which saved a lot of wood. The promotion and application of steel formwork have reached more than 75%. The production of steel formwork has reach...